Note: Depending on the program that you use, you might need to change the extension of the firmware file from. Start an image writer program for Windows, such as Win32DiskImager.exe.Save the firmware to a secure host on your network and insert the USB device into a USB port on the same host and note where the operating system assigns the device.Download the Network IPS firmware (.img file) from the IBM Security License Key and Download Center at.If you are using a system that is not supported, you must use the ISO image to install Firmware version 4.1 or later via one of the other methods. Note: This procedure is not supported on the Proventia GX3000 series, the Proventia GX4000 series (rev-A hardware), and the Proventia GX5000 (rev-A hardware with BIOS revisions before September 03 2009, version 6200I020).To reinstall the GX firmware via a USB drive, follow these instructions: Reinstalling the Network IPS firmware by VMWare: see Technote 1435766: Using VMware to reimage an IBM Security appliance Reinstalling the Network IPS firmware by using a PXE boot server: see IBM Knowledge Center Reinstalling the Network IPS firmware by using a USB device on a Windows OS: see below instructions There are three general methods you can use to reimage the GX appliances.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |